My screen hinges have 'worn out' (the display does not hold its 'working' position). Can I replace the hinges, or one of them, or somehow differently repair this, maybe tighten the hinges?
Is this a good question?
Rep: 9.5k
33
18
65
First, remove the display using this guide. Pull the clutch cover (the black part covering the hinge) to the side and out. Tighten the visible screws. I recommend using Threadlocker on the screws to keep this from happening again.
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 1
All Time: 15
