Rep: 13
1
I'm in the process of replacing my screen and attempting to run the fingerprint calibration before I seal the screen on. Where can I get the Samsung fingerprint sensor calibration blocks as listed on the calibration guide? They were not in the package with the replacement even though the calibration tools are listed under the Assembly Contents.
Is this a good question?
Rep: 1.1k
6
1
1
Dont need to be calibrated. Your sensor is allready calibrated from factory. Calibration need only when the sensor is replaced, not display.
Was this answer helpful?
It's not reading my fingerprints. It immediately says to keep my finger on longer. I'm trying the calibration to fix it.
Its original oled screen with frame? I replaced allready many this screens never need recalibration, only when was copy screen.
I'm in the same boat as the OP is in. I bought the ifixit replacement OLED screen and the fingerprint scanner is not registering; needs to be calibrated.
Maybe @vojtech59738 is used to using replacement screens that don't come with a scanner?
Rep: 695
8
1
https://www.aliexpress.us/item/325680493...
That is a link to Alli Express. They are also on eBay and Amazon.
Was this answer helpful?
Past 24 Hours: 1
Past 7 Days: 3
Past 30 Days: 12
All Time: 142
