Skip to main content

Repair guides and support for Panasonic's Viera line of televisions.

417 Questions View all

Top Half screen is black after watching for a while

My panasonic viera p60s60 also has this problem ( Why is my panasonic viera plasma tv have half screen black ) starting few days ago. Top Half screen is black after watching for a while and sometimes picture comes back or after power off for a day. So i think board may not failed. May be connector just gets dirty because tv is 10 years old.

But problem is i live alone. So it is very difficult to place tv face down. If just removing back panel, is it possible to do vertically?

Answer this question I have this problem too

Is this a good question?

Score 0
1 Comment

The problem comes back. Now even after cleaning or reseating cable/connectors, does not help.

But sometimes, only sometimes picture is displayed.

I decided to order part form ebay, the used SU board.

And it appears even after changing SU hoard, that the problem still exists. Only sometimes picture is displayed for a while. But mostly it is black.

Should it be SC board problem?. I don't see any swollen capacitor.

by

Add a comment

3 Answers

Most Helpful Answer

@aeykung it is only possible if you can get the back cover off without having to remove the stand. On some Panasonic's it is okay to leave the stand on. Your stand should have a little plastic cap where it mounts to the TV. Remove that and see if you have enough clearance to remove the back cover.

Was this answer helpful?

Score 1
Add a comment

Thank you. I can remove back panel while stand is installed to TV.

TV is now working already.

my first assumption is that boards may not fail because upper screen is black randomly.

maybe dirt or oxidation on some cables or connectors.

and after clean and test one by one, the problem is ribbon cable connecting SU and SD board. after clean that one, no black screen anymore.

Was this answer helpful?

Score 0
Add a comment

The problem comes back. Now even after cleaning or reseating cable/connectors, does not help.

But sometimes, only sometimes picture is displayed.

I decided to order part form ebay, the used SU board.

And it appears even after changing SU hoard, that the problem still exists. Only sometimes picture is displayed for a while. But mostly it is black.

Should it be SC board problem?. I don't see any swollen capacitor.

Was this answer helpful?

Score 0
Add a comment

Add your answer

aeykung will be eternally grateful.
View Statistics:

Past 24 Hours: 5

Past 7 Days: 14

Past 30 Days: 46

All Time: 336