Rep: 11
1
This question is for a 2013 Town & Country S (with dual brake pistons).
Does the caliper guide pin with the rubber bushing go on the top or bottom (front brakes)? I am second guessing myself. Thanks.
Is this a good question?
Rep: 55
2
1
On Chrysler T&C, it goes to the bottom to stabilize the possible shaking noise of the caliper. refer to Chrysler data and an example: https://www.youtube.com/watch?v=dupMpCgh.... Almost, 90 percent of the time, it goes to the bottom, almost all cars. Idea is to stabilize the caliper from making noises while driving. Reading at https://blog.1aauto.com/what-does-the-sl....
Was this answer helpful?
okay. Thanks for the correction.
Past 24 Hours: 2
Past 7 Days: 5
Past 30 Days: 14
All Time: 237
