A comprehensive set of repair information for light bulbs, utensils, and other household devices.

172 Questions View all

Expensive hair straightners have been cracked

Hi guys,

My girlfriend's ghd hair straightners have been broken by my big clumsy boot! All inner cabling seems intact but the shell is cracked and split. However, it did not shatter and the shell fits back neatly, but it will require some sort of heat resistant/tolerant adhesive. Any ideas anybody?

Thanks

Bill

Answered! View the answer I have this problem too

Is this a good question?

Score 0

Comments:

billzeebub, I am currently working on a Chi as well as a crock. Just out of curiosity, what straightener do you have :-)

by

ghd 4.2, not the switch arm

by

Add a comment
Black Friday
Broken doesn't stand a chance.

1 Answer

Chosen Solution

billzeebub, I'd go with jb weld. Available at most hardware stores as well as automotive stores.

Properties (psi)

Tensile Strength: 3960

Adhesion: 1800

Flex Strength: 7320

Tensile Lap Shear: 1040

Shrinkage: 0.0%

Resistant to: 500° F

Should do the trick :-) of course not sure if it is available in your part of the world. http://www.modelsforsale.com/catalog/pro... looks like some pretty good stuff if you are in the UK. Hope this helps, good luck.

Was this answer helpful?

Score 3
Add a comment

Add your answer

billzeebub will be eternally grateful.
View Statistics:

Past 24 Hours: 2

Past 7 Days: 2

Past 30 Days: 11

All Time: 904