one of the keys (E) is not working when pressed because it is staying pressed down unlike other keys, it won
t pop back up as image shown, so i tried to replace it but it still won't work. I found that there is a little dent under the key on the metal panel on the right side and I'm guessing that might be the cause of the problem. Is there something I can do to fix this?
Is this a good question?
Rep: 480.2k
35
329
971
There is no means to un-dent the damaged area. I’m not sure that’s the issue as I don’t see the butterfly mechanism which offers the pressure to the key. Go to this site TheBookYard - KeyCaps parts click on the country icon of your system to find the needed parts.
Was this answer helpful?
The picture taken was without the parts, I ordered new set of keys/parts from replacementkeys and put it in but that didn’t solve the problem either..
@nickim - Post a picture of the parts soo we can see what you got you should have three pieces.
Past 24 Hours: 0
Past 7 Days: 1
Past 30 Days: 5
All Time: 95
