I have replaced the combination flasher on the steering column but I’m having trouble finding the bulbs. Any help would be appreciated. This is a 05 Sebring convertible
The turn signals work but the dash indicator lights do not ???
Is this a good question?
Rep: 241
3
usually and typically the flasher unit senses the current consumption of all (good) lightbulbs
if there is a burned out bulb, the current is insufficient to turn on the pilot light in the speedo cluster
(that is if the speedo cluster bulb itself is not burned out)
Was this answer helpful?
There was 1 bad bulb which I replaced then before putting back together I put dielectric grease on all of the contact points on every bulb and where the plugs attach also the main connection on the back of the cluster.
All of my lights are now working properly. Thank You for your help.
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 1
All Time: 20
