I have a 79641072311 kenmore elite. My wife was using the machine and it quit. Pulled the top and check voltage in. I have 110 at noise reducer. Pulled the plug after it and found 1 terminal has 110 other has 62v and other is obviously ground. I don't think this is right but want some clarification.
Is this a good question?
Rep: 450.3k
11
367
1.4k
Hi @dsalak09
Here's the service manual for the washer that may help.
On p.33 there's the no power troubleshooting flowchart and on p.21 there's a diagram of the control board and display board which shows a few voltage references that might be worth checking i.e. 5V DC and 12V DC on the WH connector to the display pcb
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 1
Past 30 Days: 3
All Time: 71
