logic board power button pin connector repair?
Hi guys recently droped my s21 Ultra phone in salt water... phone was constantly powering on and off untill the battery died.. The battery is toast and ended up expanding, so i opened it up to replace the battery but the salt had corroded the "power on button" connector on the logic board. (it totally fell off the board when i opened it up)
is it possible to repair/replace the pin connector on the logic board its self?
The phone says its charging with the new battery but i have no way to connect the power on button to the logic board so i also have no way to turn it on.
Below are some photos for refrence
in the bag is the connector that fell off and the area that is tarnished is where the connector was....
i know it doesnt look good but it should clean up alright with some isopropyl
No.1 is the connector in question.
Thoughts? and thank you for your time
Is this a good question?