Skip to main content

Repair information and guides for the iPhone 6 that was released on September 19, 2014. Model Numbers: A1549, A1586, and A1589

4994 Questions View all

I changed my iPhone 6 battery to a new one and not displaying again wh

Why is my iPhone 6 not displaying again it only show the apple logo and will off

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Most Helpful Answer

Hello,

This could be caused by many things. I've seen many of these and the main causes are:

Not seating a connector properly

Bridging a contact/pin/connector

Incorrect cable placement

Failure to properly prepare the device for repair

Failure to ensure the device is off

All of the above are common causes of boot looping. Here are some troubleshooting steps:

  1. Hold the home button and power button while on boot until the apple logo shows. Let go of the pwr (Power) button and hold the home button until it reaches a screen with: A computer, a website URL and a itunes logo. This is DFU mode (I think correct me if I am wrong)
  2. Try reseating the internal connectors
  3. Test on another iphone (If you have another one around)
  4. Good luck!

Was this answer helpful?

Score 1
Add a comment

Add your answer

Blessing Adebisi will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 19