Fix Your Stuff Community Store

The Wi-Fi only version of Apple's iPad 6, released in March 2018. Available with 32 and 128 GB storage options. Features a 9.7" Retina display and 64-bit A10 fusion chip.

151 Questions View all

Options

Replaced the digitizer and there is a strip that is not responding

Hi all,

Having issues working out why one digitizer has a strip near the bottom that does not work after been replaced. started a draw program and all along the screen there is a strip that does not work.

The ebay seller said the screen was fully tested before shipped.

I bought 2 from the seller and the other screen does work (although i did manage to break the home button cable :D

Block Image

Answer this question I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest

Options

The part is defective, sometimes defects take a while to present themselves or damage occurs during shipping or the part was never actually tested, you never really know which one is the case. The home button can be replaced fairly easily, although the home buttons on iPads are a lot trickier to get set properly compared to iPhones.

Was this answer helpful?

Yes No
Score 0

1 Comment:

I took the iPad up to a repair shop up the the street. he looked at the connectors on the ipad and on the replacement screen and said there was nothing wrong with them.

Is it correct to assume that the film on the back and front of the replacement digitizer can stay while you test it? should not affect this i hope?

by

Add a comment

Add your answer

Ronnie Jorgensen will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 3

All Time: 26