Rep: 190
9
4
(They didn’t have my blender in the list so I just picked this one but the model number of mine is 4KSB8270NP)
I need new motor brushes for my KitchenAid Professional Blender but I haven’t been able to find a replacement part anywhere. Does anyone have any ideas were I could buy them?
They are like this on both sides.
Is this a good question?
Rep: 782.8k
1.1k
893
2.3k
@samuraisammy looks like KitchenAid is also branded as Whirlpool/Jenn-Air/Amana and the motor for the KSB8270 is a Whirlpoopl W11167358 and of course there are no brushes listed for this motor. Take a look on here. The motor is incredibly expensive and I would hate to even suggest to look at getting one.
Post a few images of the brushes and lets see if there is a chance of possibly just getting some other ones and making them fit. After all those are only carbon and can easily be filed down to size etc.
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 2
All Time: 168
I can find nothing related to this model number you provided. No results are coming up of any kind. Can you please post a picture of the data tag?
by brandon k
@brandon_k Alright I have added one.
by SamuraiSammy
@oldturkey03 Alright sorry for the bad picture but they are chipped on both sides and their are bits of it below the motor.
by SamuraiSammy
@samuraisammy thanks for the picture. KitchenAid use some odd shaped ones on some of their equipment but these do look chewed up :-). Do you think the black plastic case could be opened to get to the actual brushes? Also, can you give us some dimensions of this. Even rough ones will work because I recognize its a PITA.
by oldturkey03
@oldturkey03 I found pieces of it in the bottom of the blender and it appears to be pretty rough along the edges. I will look into getting some measurements.
by SamuraiSammy
Show 5 more comments