Fix Your Stuff Community Store

50" Plasma TV by Sanyo released in 2007.

80 Questions View all

Options

TV shutdown. No picture or sound.

I replaced all 7 fuses and reconnected the power. The TV powered on with audio on one channel, but no picture. The power board has a green flashing light and the left board has a solid green light. When the TV is first turned on there is a clicking sound. Can you offer any solutions?

Answer this question I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Most Helpful Answer

Options

Hi @pzburgher,

Start with the no video troubleshooting flowchart from the service manual

You can also check the no power troubleshooting flowchart on p.41 to make sure that all the voltages are there and correct.

Was this answer helpful?

Yes No
Score 1

1 Comment:

the clicking sound is probably normal. Voltage supplied to the TV must stabilize b4 it is applied and the click is the time delayed relay.

by

Add a comment

Add your answer

Ron Brooks will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 36