Skip to main content

27" display with 2560 x 1440 pixels resolution Thunderbolt & MagSafe cable attachments

160 Questions View all

The monitor worked fine, then suddenly made a pop and now its dead

This is not related to the common periodic flickering and then the screen going dead until you unplug it and plug it back in. That was another Thunderbolt display that I fixed with new cables. This one made a loud POP and then went dead. There was no problem or issue prior. I’ve tried a different power cable, but that still didn’t help.

Answer this question I have this problem too

Is this a good question?

Score 0
1 Comment

@chunnel - Time to do a bit of careful inspection of the logic board and power supply for a blown capacitor! You should be able to see a burnt component.

by

Add a comment

1 Answer

Most Helpful Answer

I think the power supply died,

[linked product missing or disabled: IF359-001]

Was this answer helpful?

Score 1

2 Comments:

Thank you. I had that same thought. You seem to be out of stock so I purchased it for the same price on Amazon. I'll let you know if it works.

by

Alright :) i hope it works

by

Add a comment

Add your answer

Bryan Karlan will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 9

All Time: 96