Skip to main content

1.6 or 1.8 GHz dual-core processor, 2 GB or 4 GB of SDRAM, 64 GB or 128 GB SSD

192 Questions View all

Is it possible to disconnect only the trackpad?

I’m having problem the keyboard and the trackpad, it’s freezes. Sometimes SMC reset does the trick, but after awhile it will freezes again. I’m looking through boot log and got this:

(IOHIDFamily) Invalid digitizer transducer

So I’m just curious is the touchpad is the one to blame? And so I want to disconnect the trackpad without disconnecting the keyboard. I see 4 cables on the trackpad:

Block Image

  1. ??
  2. The cable to the mainboard
  3. The cable to the keyboard
  4. ??

What is cable number 1 and 4? Curious if these cables are the actual trackpad cable, and wondering can we disconnect these cables?

Answered! View the answer I have this problem too

Is this a good question?

Score 0
1 Comment

1 - Y signal inputs from trackpad

2 - combined signal connection to logic board.

3 - Keyboard input

4 - X signal inputs from trackpad

The logic board converts the analog signals to digital ones the main logic board can understand.

by

Add a comment

2 Answers

Chosen Solution

I bring the macbook to a local repair shop, they were able to identify a transistor that malfunctioning in the motherboard, and after replacing it, the trackpad and keyboard works fine.

Thanks for your reply @danj !

Was this answer helpful?

Score 0
Add a comment
Most Helpful Answer

The trackpad has three functions

  1. The Trackpads input and decode
  2. Keyboard input and decode
  3. Connection for the signals to the logic board

In your case the decode logic is damaged within the trackpad, you’ll need to replace it. Your keyboard won’t function without the trackpads decode logic.

MacBook Air 11" (Mid 2011-Mid 2012) Trackpad

MacBook Air 11" (Mid 2011-Mid 2012) Trackpad Image

Product

MacBook Air 11" (Mid 2011-Mid 2012) Trackpad

$29.99

Was this answer helpful?

Score 1

3 Comments:

Thanks for your reply, I'm ordering the trackpad now

by

Just installed the new trackpad, sadly still the same, even the error log still said the same thing (IOHIDFamily) Invalid digitizer transducer.

Any idea what should I do next?

by

Add a comment

Add your answer

Tri Emil Alim will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 4

All Time: 76