Skip to main content

Kenwood Digital Media Receiver with Bluetooth. Model Number: KMM-BT522HD

3 Questions View all

6 speakers to a 4 speaker head unit?

Ok, i know all the standard reasons NOT to do this (wire an additional pair of speakers into the HU) in the traditional way, but after a bit of googling i havent found anyone mentioning the following: can i take the amp from an unused HU, wire it to power and use it to power the two additional speakers? I mean, IN MY HEAD this seems a reasonable thing to attempt ….

I just dont know the fundamentals well enough to know of potential pitfalls BEFORE my car lights on fire…

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Most Helpful Answer

I have seen separate amps for subwoofers so it shouldn’t be a problem. I would defiantly run a separate power cable for it and make sure it is fused.

Was this answer helpful?

Score 1

Comments:

You wouldn't happen to be savvy enough to whip up a schematic/diagram would ya?

by

Add a comment

Add your answer

agnawn uh mous will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

All Time: 23