My Hitachi Projector CP-X5021N, will not turn on
Power light is red, lamp and temp lights just flash amber.
Bulb was changed out after the fact, and im at a loss as nothing to tell me of this light error combination. Im thinking the power supply is dead, if thats the case where can i purchase anew one.
Is this a good question?
Rep: 783.4k
1.1k
893
2.3k
@mohawkmafia you are right. There is no documentation about the POST blink codes as you described.
I wonder if this is not related to same temperature issue (check your fan etc.). Follow the flowchart from the SM for the Lamp-Does-Not-Light error and see if you can narrow it down
This might be useful for your repair as well Hitachi Cp X4021n Cp X5021n. As for the power supply it looks like the Hitachi number is HA03191 and you may have to try places like ebay.com etc. for a replacement or try to have yours repaired.
Was this answer helpful?
Past 24 Hours: 1
Past 7 Days: 7
Past 30 Days: 27
All Time: 403
