Fix Your Stuff Community Store

Repair guides and support for your Samsung TV.

2610 Questions View all

Options

Cannot get picture on tv after replacing board with a known good one.

I have a'''Samsung UN55NU6900FXZA that when I turn it on the backlights flicker on and then off, there is also no sound. The on button flashes twice when the blacklight comes on. I replaced the board with a know good one and its the same thing. I removed one ribbon cable and nothing, but when I reattach the cable and remove the other ribbon cable the back lights stay on and the tv has sound but still no picture. Here is a picture of the back of the tv and the board with the offending ribbon cable not plugged in… Anybody got any idea what the problem is?

Block Image

'''

Answer this question I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest

Options

Unfortunately it looks like you have a dead/shorted out LCD panel. If you have tried a new mainboard/powerboard and backlight stays on only when you disconnect the bottom lvds then that's all you can do. A new panel is going to cost more than a new tv.

Hope this helped, not really the news someone wants to hear but none the less. Return the parts you can ?

Was this answer helpful?

Yes No
Score 0
Add a comment

Add your answer

Charles Littell will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

All Time: 214