Rep: 167
4
2
1
So today I repaired a customers IPhone X screen. The customer had a screen burn with the keyboard being the location of the burn. Due to this being an AMOLED screen I am familiar with this issue. However after putting on multiple different screens, the screen burn was still there. Any ideas?
Is this a good question?
Rep: 51k
8
18
101
Are you copying the screen data to the new screen? If so I have seen this happen a few times where the burn gets transferred as well as the data. I don’t think there is much you can do except delete the data off the screen and lose true tone.
Was this answer helpful?
Rep: 499
5
4
It could possibly be a problem with the screen’s connector on the logic board. Depending on the color and intensity of the burn in, a pin on the motherboard could possibly be burnt or have another problem with it. It could also possibly be a capacitor however I would expect it to be a pin on the connector. Hope this helps!
Was this answer helpful?
Past 24 Hours: 2
Past 7 Days: 9
Past 30 Days: 27
All Time: 659
