So i found this…..iPhone 6s Plus Blank Rear Case Item code: IF315-057-1. My sons phone is bent and the edges of the screen arent working. The glass was already replaced and relatively new. Im hoping to straighten the case/frame to get it working again. Any advise is greatly appreciated.
Is this a good question?
Rep: 50.7k
8
14
101
I would stay away from the blank housings as they need to be assembled with the buttons and flex cables. If you intend on trying to straighten the housing make sure you remove the logic board. There are devices to straighten housings but they cost around $200.
I would recommend purchasing an iCloud locked board from eBay and just replace the logic board. You should be able to source them for around $50 or less.
Was this answer helpful?
Mr. Chris thank you for all your words of wisdom. I agree, eBay iCloud locked device is what we were looking into
Be well, Be safe
Past 24 Hours: 0
Past 7 Days: 1
Past 30 Days: 4
All Time: 34
