Watchstrap bridge post snapped off
With one watchstrap bridge post having snapped off leaving watchstrap unsecurable, could a new top body(?) be fitted and at what cost?
Is this a good question?
With one watchstrap bridge post having snapped off leaving watchstrap unsecurable, could a new top body(?) be fitted and at what cost?
Is this a good question?
Unfortunatley i found this on th german support page: https://support.garmin.com/de-DE/?faq=si...
Was this answer helpful?
I would research epoxy glue for this. It may be tough finding one that will adhere to the plastic. I would fill the void, then press in the pin. Of course, it make replacing the band a little difficult.
Was this answer helpful?
I bought a new case on Alibaba.com for $24. There are a few you tube videos showing how to replace it, here's the first one I found: https://www.youtube.com/watch?v=-lySFxZG....
Was this answer helpful?
Here's how to handle this problem, I tried it and it's quite effective
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 3
All Time: 649