2 broken pins in u3400
I was replacing U3400 and i have a 2 broken pins on the board, any ideas how to fix it?
Is this a good question?
I was replacing U3400 and i have a 2 broken pins on the board, any ideas how to fix it?
Is this a good question?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 38
2 Comments
What pads came off? There are 9 NC pads so it could be one of those.
by Chris Stables
@imicrosoldering actually i dont have the schematic to tell you which pads, but there is 3 pins in the middle of the board are broke, i just need an advice of how to take it back if there is anyway
by Mahmoud Baroudi