Fix Your Stuff Community Store

Repair information and guides for the iPhone 8 that was released on September 22, 2017. Model: A1863, A1905

873 Questions View all

Options

Flex cables not connecting to logic board

Ive done everything right, now for what seems to be the easiest last part everything has gone up in flames.

The WiFi variety antenna is not clicking into the logic board, now it seems the antenna connector is deformed so bought a new one hoping it will work.

Also the wide flex cable from the charging connector does not stay in the logic board now.

Does the sticky tape around each connector help to get the connectors to stay in?

Phone has been dismantled for two days so possible the glue is dry.

Anyone run into this issue?

Answer this question I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest

Options

Hi,

The wider flex cable should clip into place like a little Lego. no glue is required. if it doesn’t clip into place, you most likely broke the connector on the cable itself or on the logic board. This mistake can cost you to replace either the flex cable or the logic board entirely. if you could provide a few pictures that would be great.

Was this answer helpful?

Yes No
Score 0
Add a comment

Add your answer

Mister Zee will be eternally grateful.
View Statistics:

Past 24 Hours: 2

Past 7 Days: 4

Past 30 Days: 8

All Time: 188