Fix Your Stuff Community Store

Released September 22, 2017. Model A1864, A1897. Available as GSM or CDMA, 64 or 256 GB Storage Options, and the color options are gold, silver, and space gray.

639 Questions View all | 44 Parts Shop

Options

Screen dead after back case replacement

Hi

i needed to replace the broken back glass on my iPhone 8 Plus which involves removing every component. I’ve done a few iPhone repairs in the past so I’m relatively competent. Everything has gone well up to the point of putting the logic board into the new case. One of the stand off screws near to the screen connectors has sheared off and the thread is stuck in the hole. Now the screen does not light up. Would this be the cause of the black screen?

Answered! View the answer I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Chosen Solution

Options

The first thing you need to determine is if you have an image problem or backlight problem. I do know there is one backlight circuit under that standoff. You will need to get the diode readings from the LCD connector and compare them with a known good board.

Was this answer helpful?

Yes No
Score 1
Add a comment

Add your answer

ian will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 81