Skip to main content

Released September 21, 2018. Models: A1921, A2101, A2102, and A2104 / Available as GSM or CDMA / eSIM or nano-SIM / 64, 256, or 512 GB / Silver, Gold, or Space Gray (Pronounced "iPhone 10 S Max.")

376 Questions View all

Will Face ID work after replacing logic board?

Will Face ID work after replacing only the logic board on an iCloud locked iPhone Xs max?

Answered! View the answer I have this problem too

Is this a good question?

Score 1
1 Comment

hi replaced a mainboard for an iphone 13pro max as the mainboard was malfunctioning and when connect it to "3utools" it says all parts are functioning as normal. but it says " unable todetermine if your iphone a genuine apple part" It says this for the front camera , battery, face IDand display. but when connected to "3utools " as well any other software to test the parts. I get 100% functionality. is this a software issue ?? or somthing esl?

by

Add a comment

1 Answer

Chosen Solution

You would need to transfer the Earpiece Speaker and Front Sensor assembly plus the front camera assembly to keep face ID

Was this answer helpful?

Score 2

3 Comments:

Are there any videos or guides on doing this?

by

@mochastring IFixit has a replacement guide on the ear speaker but not sure about the front cameras. I would also watch some videos on you tube. The most important thing is to take your time and be very careful not to damage the flex cables.

by

@mochastring Actually a screen replacement guide of iPhone X and above usually covers the transferring of the Face ID parts.

by

Add a comment

Add your answer

Taiwera will be eternally grateful.
View Statistics:

Past 24 Hours: 1

Past 7 Days: 5

Past 30 Days: 13

All Time: 991