Skip to main content

The tenth generation Corolla (E140/E150) was released in Japan in October 2006. A narrow variant was available in Japan while wider versions were sold internationally.

28 Questions View all

Car doesn’t full engage reverse

Sometimes when i put my car in reverse it would’t fully engage reverse, so i would have to let go of the clutch and put it back to neutral then press down the clutch again then put it in reverse so it would fully engage reverse .

When it doesn’t fully engage , it would get stuck halfway and wouldn’t go down any further (i wouldn’t slam it and put it into reverse, wouldn’t wanna risk breaking the transmission or gears so i would repeat the steps to get it in smoothly) i have never drove with the reverse halfway not risking my first car . This is a 2008 Corolla S [Manual Transmission]

I’ve had people commenting telling me to just get an actual manual transmission car that aren’t mainly automatic like the corolla but this is my first car and i learned driving stick from this car.

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

There is no synchro on the reverse gear. When it doesn't go all of the way in let out the clutch a little bit and it should drop in.

Was this answer helpful?

Score 0
Add a comment

Add your answer

MEGA BONER will be eternally grateful.
View Statistics:

Past 24 Hours: 2

Past 7 Days: 7

Past 30 Days: 15

All Time: 800