My Touch ID randomly stopped working. I went inside my phone to work on a shaky camera and closed the phone back into place. It was still working for about 3 hours after the repair and then stopped. But my home button is still functional. What’s going on?
Is this a good question?
Rep: 50.7k
8
14
101
If you didn’t remove the home button it will either be the home button connector or a damaged flex cable. Make sure the home button connector is seated properly on the logic board. That is the one running vertical. If it is not that it will be a damaged flex cable and you will need to replace your screen.
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 2
Past 30 Days: 3
All Time: 41
