Technics eh 500 shows F61 and becomes hot then shut off.
Technics eh500 shows f61 and cuts off
Is this a good question?
Score
0
638944
1 Answer
Chosen Solution
Rep: 449.5k
11
366
1.4k
Hi @sipiwo
F61 indicates a faulty tuner/amplifier IC601.
Here’s the service manual (direct download link) which should help.
Also make sure that there are no short circuits on the speaker cable(s) connections etc
Was this answer helpful?
Score
1
What makes it to become hot and shut off?
Components become hot due to too much current flowing through them.
This is usually caused by short circuits or components failing.
When this occurs protection circuits in the device shutdown the device to prevent any further damage from occurring.
As the manual suggests test IC601 to see if it is faulty.
thank sir,'ll check my IC.
