Fix Your Stuff Community Store

The Wi-Fi only version of Apple's iPad 6, released in March 2018. Available with 32 and 128 GB storage options. Features a 9.7" Retina display and 64-bit A10 fusion chip.

152 Questions View all

Options

The LCD malfunction after digitizer replacement

Cracked my digitizer weeks ago, and ordered a new one. After replaced the crack one and connected the LCD to the motherboard, I found that the LCD does not work anymore. It can be turned on but looked like a damaged LCD. The pic is attached. I suspect that I damaged the LCD accidentally during the replacement. Also, the computer is not able to recognize the ipad when I connected it to my laptop. Guys, is there any chance that I could get this fixed and work?

Block Image

Any help appreciated


Answer this question I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest

Options

It looks like it has a bad connection on the lcd connector. Get a magnifying glass and check for any bent pins on the motherboard and LCD. If they are ok or if you straighten them up clean the connections with a qtip and alcohol and it soft brush. Check to make sure it works before you glue it down again.

Was this answer helpful?

Yes No
Score 0
Add a comment

Add your answer

jtian will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 45