Second generation of iPhone. Model A1241 / 8 or 16 GB capacity / black or white plastic back. Repair is more straightforward than the first iPhone. requires screwdrivers, prying, and suction tools.

1500 Questions View all

iPhone not working after replacing digitizer


Hope you can help..

My friend had a iPhone 3G that was working, but had a cracked digitizer and no power button, but it did still work.

He asked me to replace the digitizer and the power button, so while I was at it I thought I would replace the back to the phone too. I also replaced the battery.

However, I have replaced everything and put it all back together and now the display doesn't work (which it did before)..

It does make a noise when connected to iTunes though!

Any ideas?

Thank you


Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

1 Answer

Chosen Solution

Try to reset the phone by holding the sleep/power button and home button for 10 seconds.

If that doesn't work, try to lift the logic board off the battery and reset the phone that way. You'll need to remove the screws around the logic board in order to do so.

Was this answer helpful?

Score 3


also check connector 1 the LCD


Add a comment

Add your answer

Leo Feazey will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 993