Second generation of iPhone. Model A1241 / 8 or 16 GB capacity / black or white plastic back. Repair is more straightforward than the first iPhone. requires screwdrivers, prying, and suction tools.

1496 Questions View all

Why can't I turn the phone on?

I took the front off of the phone to place the 1 tab back into position as I was getting a white screen issue. After putting the phone back together I couldn't get it to turn back on. I didn't even fully take it apart, only lifted the screen long enough to put the tab back into place. Any suggestions?

Answer this question I have this problem too

Is this a good question?

Score 7
Add a comment

5 Answers

Most Helpful Answer

check that the lock-switch connector is on fully, as there may be no hardware failure, but somthing preventing you from turning it on.

Was this answer helpful?

Score 2

Comments:

Where is the lock-switch connector?

by

Where is the lock-switch connector located?

by

Om the right corner o.

by

Add a comment

i think my phone have hardware problem

Update

please show me phones diagram

Was this answer helpful?

Score 2

Comments:

gayan, it would work so much better if you ask your ow Click on the link on the right side of this page. "Ask a question" and give as much detail as possible.

by

Add a comment

my samsung s4 is not working it fell the screen cracked and the mother board not working i cant switch it on

Was this answer helpful?

Score 0
Add a comment

wen i turn un my phone it stop by the starting tone

Was this answer helpful?

Score 0
Add a comment

why cant my phone turn on

Was this answer helpful?

Score 0
Add a comment

Add your answer

shannon will be eternally grateful.
View Statistics:

Past 24 Hours: 1

Past 7 Days: 4

Past 30 Days: 24

All Time: 1,659