Skip to main content

High-performance tablet computer by Apple.

563 Questions View all

No Touch after Screen remplacement

IPad Pro 12.9

I remplace the screen and batteries and and the touch screen wont working…

Connectors ok, battery 100%, screen ok but no touch….

i need help

TY Michel

Answered! View the answer I have this problem too

Is this a good question?

Score 1
Add a comment

1 Answer

Chosen Solution

You either have a defective replacement screen or you damaged something during the repair. Go back through the guides and double check all the steps.

Try these steps:

  • Double check that the flex connectors are properly seated
  • Visually inspect, preferably with magnification, the condition of the connectors on both the flex cables and the logic board
  • Also look to see if any components appear missing or damaged
  • Try connecting the original screen to see if the problem is consistent with the screen or logic board.

Was this answer helpful?

Score 1

Comments:

Thank you, for the answer, i have the same pb with the original screen. So i will checked all connectors on the motherboard.. to be continued...

by

Add a comment

Add your answer

Mikhrych will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 33