Skip to main content

Repair information and guides for the iPhone 6S released by Apple on September 25, 2015. Models: A1688, A1633

2690 Questions View all

screen artifacting after screen replacement

i dropped my phone last week, the screen was cracked and it started artifacting so i replaced the screen myself following the ifixit guide on how to do so, after replacing the screen im still getting artifacts ive tried unplugging and replugging the display and digitizer cables but no luck

any help much appreciated

Answer this question I have this problem too

Is this a good question?

Score 1

2 Comments:

dazza stuart what kind of artifact?

by

@oldturkey03 yellow lines down the screen almost like tv static

by

Add a comment

1 Answer

Could be a few issues. Either a bad replacement part, or accidental damage during repair.

Check the connectors for the LCD. Are any of the golden pins visibly damaged? Any dust in there? Any noticeable marks on them at all?

Check the new display for the same potential issues.

If you notice any damaged pins, you’re going to need to take it to a specialist repair shop. It might need board work. If there’s any dust in the connectors or pins, try blowing it out with compressed air (Don’t use your mouth, the last thing you need to do is get spit into the connectors too!), or use some isopropyl alcohol, at least 90% concentration, to try and clean it out with a cotton ear bud

Good luck!

Was this answer helpful?

Score 0
Add a comment

Add your answer

dazza stuart will be eternally grateful.
View Statistics:

Past 24 Hours: 1

Past 7 Days: 1

Past 30 Days: 8

All Time: 112