Skip to main content

Released September 25, 2015. Model A1688/A1633. Repair of this device is similar to previous generations, requiring screwdrivers and prying tools. Available as GSM or CDMA / 16, 32, 64, or 128 GB / Silver, Gold, Space Gray, or Rose Gold options.

2563 Questions View all

iPhone LCD will not close with housing after battery replacement.

I’m having trouble trying to close the LCD on an iPhone 6s repair. The battery was replaced and the internals were cleaned. It just won’t snap back in, I am feeling resistance right in the middle of the frame. I don’t want to press too hard, but even with some force, it’s just going back in, I checked and there is no blockage and the tabs at the top are in place. I’m really stuck.

Answered! View the answer I have this problem too

Is this a good question?

Score 1
Add a comment

1 Answer

Chosen Solution

I fixed it, for those of you that need help later on,

I had to very carefully align all of the insert tabs to their slot and slowly but firmly press them in from top to bottom

Was this answer helpful?

Score 0
Add a comment

Add your answer

Andrea Lopez will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 31