I unplugged my TV to move the cords from it but when I plugged it back in to the same outlet it wouldn't turn on but before I plugged it out it was working perfectly fine. (I also don’t see the red light.)
Is this a good question?
Rep: 31
2
If you hold the power button down for around 30 seconds, it will refresh. If that doesn't work, and you don't hear a clicking noise when you push the power button, the relays might not be engaging. If you gently tap on the blue or black boxes on the power supply board, they might start up again. For safety, use a non-conductive tool and don't touch any contacts.
Was this answer helpful?
Is it working now?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 42
