Fix Your Stuff Community Store

Repair Guides for HP Desktops.

356 Questions View all

Options

DMI tool for 00A system board error

Is there a HP DMI tool for 00A system board error. Missing product ID info causing aboot up error? I have all this info to enter into something… Thanks

Update (11/17/2019)

Mike:

Thanks for your quick reply. I have an HP Pavillion 510-a010, bought it new in 2016. I will try your solution and I have jumped the CMOS jumpers but that did not work. Is that what you are referring to? I also think the 4 pin molex cables may be an issue but we’ll see. Thank you, Stewart

Answered! View the answer I have this problem too

Is this a good question?

Yes No
Score 1
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Chosen Solution

Options

Unplug power supply.

Press power button until fans stop.

Reset BIOS. You don’t state which HP desktop model.

There is usually a jumper to short to clear BIOS to factory default. Often near Front Panel connectors.

Plug-in power cable and switch on.

How did it go?

Was this answer helpful?

Yes No
Score 3

2 Comments:

Do not turn on the pc while the jumper is shorted

by

@captainsnowball Thanks.....Is this the CMOS jumper pins next to the password jumper pin? Andhowdo I 'short it'? And why? HP 510-a010 model

by

Add a comment

Add your answer

shaimson7 will be eternally grateful.
View Statistics:

Past 24 Hours: 4

Past 7 Days: 10

Past 30 Days: 38

All Time: 4,911