Skip to main content

ZTE Quartz, Released in 2014, Identified by Z797C model number under rear panel

7 Questions View all

Touchscreen wont work after soda spilled on it

How can I fix my touch screen and make it work again after soda spilled on it…it chathes and comes on and the buttons work just not the touch screen

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Most Helpful Answer

Sarah Harcrow  You will have to replace the digitizer. [ZTE Quartz Z797C| This video]will get you into your phone. Replacement digitizer are available at places like this. Personally I would replace the complete display assembly since it will be easier then messing with separating LCD/digitizer etc. Get something like this and be done with it.

Since this is spilled soda, you want to go ahead and clean all the inside part (motherboard etc.) with 90%+ isopropyl alcohol and a soft brush. If you do not clean your phone, the soda will pretty much destroy the rest of it due to the corrosion created.

Was this answer helpful?

Score 1
Add a comment

Add your answer

Sarah Harcrow will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 2

All Time: 66