Fix Your Stuff Community Store

iMac Intel 27" EMC 2309 (Late 2009, Core 2 Duo 3.06 or 3.33 GHz) ID iMac10,1, EMC 2374 (Late 2009, Core i5 2.66 GHz or Core i7 2.8 GHz) ID iMac11,1

467 Questions View all

Options

Is this possible to do? Please answer

So i have a late 2009 imac 27’ and while opening it i accidentally broke the LVDS internal screen connector off the logic board and i broke it completely so i had to run it off an external monitor, and so i bought a new logic board and the same thing happened where i broke the internal screen connector. So i give up and so i was wondering if it is possible to connect the internal screen to the mini displayport port on the imac instead of the internal screen connector?? is there an adaptor or cable to do tbis?

Answered! View the answer I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

2 Answers

Filter by:
Most Helpful Newest Oldest
Chosen Solution

Options

Sorry you can’t route the signal out and then back in via the external miniDisplayPort.

The best thing here is to find someone with good soldering skills who can fix one or both logic boards. The connector is available.

Was this answer helpful?

Yes No
Score 1
Add a comment

Options

no this is not possible to do because Apple uses a proprietary connector

Was this answer helpful?

Yes No
Score 0
Add a comment

Add your answer

Teddy will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 3

All Time: 57