Second generation of iPhone. Model A1241 / 8 or 16 GB capacity / black or white plastic back. Repair is more straightforward than the first iPhone. requires screwdrivers, prying, and suction tools.

1491 Questions View all

Replacement parts not working

So my sister recently got a iPhone 3g that was dropped multiple times. We ordered the parts that needed to be replaced which was the back case, new power button, and a new lcd screen. I tested the screen before I replaced the back case and it was working fine. I replaced the back case and power button and put everything back in. When i plugged in the screen it was still working, but then the digitizer pulled out. After that all i could get the screen to do is turn on and go white. What do I to fixed this?

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

What do you mean "pulled out" ? It stopped working or it had physically come loose?

White screen issues are generally resolved by a battery reset. This means you have to physically stop the connection between the logic board and the battery momentarily (lift the logic board off the battery for a few seconds and then replace).

Was this answer helpful?

Score 0
Add a comment

Add your answer

Justin Johnson will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 231