Skip to main content

Fix Your Stuff

Right to Repair

Store

Touch not working after screen repair

Fixing a friends Pixel 2 XL, had a cracked screen with no touch so I replaced the screen with an original graded screen and the touch still doesn't work. Tried a factory reset but still nothing, does anybody have any ideas?

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment

SKIP THE UPGRADE

Save by fixing with an all-in-one kit.

Shop iPhone Fix Kits

SKIP THE UPGRADE

Save by fixing with an all-in-one kit.

Shop iPhone Fix Kits

1 Answer

First,many screens sold as original or oem are fake. They are genetics and the sellers on eBay or amazon lie.

This doesn’t mean it won’t work.

Did you disconnect the battery prior to repair? You ALWAYS want to disconnect it first. If not,when you connect a screen,it can short high voltage lines to low voltage lines if you connect it at a slight angle…the pins may go on cockeyed at first,for a split second shorting voltage. This can cause a quick surge(like a punch to the face) of electricity to damage components.

Have you taken it back apart? Did the old screen still work with Touch? If so,you should try it to rule out. If it stopped working at all after being cracked,the first thing to do is try a new screen…that is,as long as you have taken it back apart and disconnected and reconnected the screen to make sure it wasn’t a bad or loose connection.

Was this answer helpful?

Score 0

Comments:

It's definitely an original screen, I connected with the battery disconnected.

by

Add a comment

Add your answer

David F will be eternally grateful.
View Statistics:

Past 24 Hours: 4

Past 7 Days: 12

Past 30 Days: 37

All Time: 261