White screen after powering on

Question

iPhone 3GS

Revamped version of the iPhone 3G with faster processing speeds. Repair of this device is similar to the 3G, and requires simple screwdrivers and prying tools. Model A1303 / 8, 16 or 32 GB capacity / black or white plastic back.

1502 Questions View all

Question Closed

Carlos @carlos39261

Rep: 55

3

2

Posted: Jul 25, 2011

Options

White screen after powering on

hi,

When I power it on, I never get the apple logo, and it goes right to a white screen. If I hit the power/lock button it will go black screen. Hit it again and white screen. The mute toggle works (phone will vibrate), and iTunes recognizes the iPhone just fine. Holding home button will bring up voice control. I have tried a new LCD and digitizer's, and same symptoms.

I have restored the firmware twice using iOS 4.1 and 4.2.1, but keeps same white screen

thanks!

Answer this question I have this problem too

Is this a good question?

Yes No

Score 0

2 Comments:

try the simple hard reset. hold power and home for 10 seconds until the apple appears then allow to reboot. If that doesn't help then you should start your own question as this one is from last year... not very current!

Jul 23, 2011 by pollytintop

didn't work either, I ll open a new question.

thanks

Jul 24, 2011 by Carlos

Add a comment

try the simple hard reset. hold power and home for 10 seconds until the apple appears then allow to reboot. If that doesn't help then you should start your own question as this one is from last year... not very current! — pollytintop