Fix Your Stuff Community Store

Computers that generally don't include an integrated display, and are meant to be stationary.

2159 Questions View all

Options

VGA has no signal after re-flashing

Hello,my vga has no signal on the monitor after i plugged it in

i’ve tried every possible solution such as:

Disabling Intergrated GPU

Replugging VGA

Cleaning the Ram

ETC

is there any other Solution? the vga is RX570 8GB Nitro+

specs:

OS : windows 10 64bit

Proc: Ryzen 3 2200G

Ram : Vgen Tsunami 2X4 Kit

SSD:Kingston 240gb

HDD:2TB Seagate Sata

PSU : 500Watt Andyson Jupiter

Thanks.

Side Note : The VGA Worked before reflashed.

Answered! View the answer I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Chosen Solution

Options

What part of the computer the bios / firmware was flashed on?

Motherboard, graphics card or SSD? As some of these have firmware updates.

Was this answer helpful?

Yes No
Score 3

4 Comments:

Graphics Card

by

Try running off integrated graphics and see if you still get display. You may need to remove the graphics card to get this to work.

Make sure to keep the amd integrated graphics enabled in bios before installing the card back in again so you can use it for troubleshooting with display.

Sounds like the bios flashed on the GPU might not have been the right / matching one. There are bioses out there that only work for certain variants.

by

Tried Disabling the intergrated and reinstalling(remove and plugging back on) still doesnt work.i'll try number 2 n 3 best of luck

by

Thanks for the tips,the vga is working again

by

Add a comment

Add your answer

Faiz Sadat will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 3

All Time: 379