Kinda need help putting my 454 big block engine back together. Bought a wiinabago a few monhs ago that need some work.Had a friend offer to help.Which was great till he got everthing dsasembled and then backed out on me .I knew enough to get the block put back together correctly with new parts. The hard part is finding out which brackets go where , where wire connections, and hoses go . Can you help
Is this a good question?
Rep: 2.3k
3
2
6
search for info on the original vehicle the 454 came out of, and then look for a diagram that shows the drive belt(s) routing around the alternator, power steering pump, water pump, etc., as this will enable you to see where these accessories are located, thus where the brackets should be. you’ll be able to determine what electrical connectors go to each of these primary accessories, as they are uniquely fitted. you can also look for both wiring and vacuum system diagrams to help you. (too late now, but pictures taken before and during the disassembly, and/or labeling of vacuum and electrical connectors, etc., is a good way to avoid this kind of dilemma.) Good Luck!
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 1
Past 30 Days: 2
All Time: 35
1 Comment
@brooks751 so this is the engine for the Winnebago? What's the make and year, model?
by oldturkey03