Skip to main content

Repair information and guides for the iPhone 6 that was released on September 19, 2014. Model Numbers: A1549, A1586, and A1589

4994 Questions View all

iPhone 6 No Sound, Does not connect to computer

Block Image

Hi there,

I have a iPhone 6 that is having a no sound issue as well as is unrecognizable by a computer. The phone does not output sound even when it has headphones plugged in.

I have tried software reset. I have no idea but is it possibly the small audio ic? tristar? Tigris? I have no idea… Hoping someone might have some insight. Trying to break into board level repairs… please take it easy…

Thanks in advance.

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

The problem is your charge port, try to change your charge port, thats why you have no audio output on speaker and headphone jack because charging port is 1 modular part connection.

Was this answer helpful?

Score 0

4 Comments:

This is not the issue. Have swapped it 3 times no luck. Thanks though! I should've added it to the list ...

by

just check your charge port connection into the board make sure its clean or your pin is not damage, its nice to give more conclusion if you add image of your board.

by

I agree it's most likely either a bad charging port connector on the logic board or something up with the charging and audio circuit going bad possibly from liquid damage.

by

There does not seem to be any visible issue with the connector on the board. Could it still be damaged? Not really sure where to turn at this point.

by

Add a comment

Add your answer

alexdekock9 will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 5

All Time: 56