Rep: 2.3k
13
5
1
I have a iPhone 6 and after a month of charging it wouldn’t turn on. I replaced the battery and it still didn’t work. Then i replaced the screen and the dock connecter and it still didn’t work. What should i do now?
Is this a good question?
Rep: 34.6k
10
22
44
Maybe needs the charging chip replaced
Was this answer helpful?
What is that?
He is talking about the U2 IC Chip. It’s very common to go in the 6 and 6 plus. If you do not have micro soldering experience, you will not be able to fix this issue. Id advise you contact a board level repair technician to have it serviced
If i replace the logic bored would it fix the issue?
Yes scott as long as the board is working
you can test to see if it is the battery by taking it a part and plunging in a charger and testing to see if there is power being sent to the battery. you can find videos on how to do that on youtube and here is a video you can go off of. https://youtu.be/xy4DScu80OA this is a good video to help you test it. watch it before you try. I am not responsible for any damage you do. if it shows to be the battery the pull tabs that use to glue it down can break if so do your homework before taking a flat head screw driver in there in poking a hole in the battery. will not come out pretty
Was this answer helpful?
I already did that nothing worked.
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 50
