Skip to main content

Repair information and guides for the iPhone 6S released by Apple on September 25, 2015. Models: A1688, A1633

2693 Questions View all

Screen blacks out after apple logo

iPhone 6s screen blacks out after I get past the Apple logo entering into the lock screen. The phone has a brand new LCD that has been tested. Any thoughts?

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

What happens when you connect the phone to an iTunes enabled computer? If the phone is properly booted and powered, then iTunes should recognize it. If it does, then shine a bright light on the screen to see if there is a dim image.

A common failure on the iPhone 6S, especially after a DIY repair, is that the backlight filter gets blown because the fixer forgot to disconnect the battery during the repair. That leaves the backlight circuit fully powered and any misalignment when re-connecting the connector can cause the circuit to blow.

This is repairable but requires a micro-soldering repair and is not DIY.

Was this answer helpful?

Score 4
Add a comment

Add your answer

Jesse Collins will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 3

All Time: 55