Dart not going all the way in
The darts will not sit all the way in the chamber. They will slide out about a 1/2 in, this not fire correctly
Is this a good question?
Score
0
540761
2 Answers
Most Helpful Answer
Rep: 13
3
nerf guns are picky about their ammo sometimes, that gun in particular is really picky, darts from HB or Walmart nock-offs have slightly different inner diameter then Nerfs….. also kids chewing on them doesnt help in my experience. . my kids will eat anything..
Was this answer helpful?
Score
1
I have the same problem. It is just one chamber, all the time. Doesn’t matter which darts (I’m only using the 3 Elite darts that came with the gun.... since it’s my child first one). The other two chambers always work and the third chamber always pops the darts out an inch. I’ll probably try to dissemble and see if I can figure out what’s going on
So as its not going in fully i taped some paper to the dart shown in the below picture and it worked cause it was loose
Was this answer helpful?
Score
0
