Skip to main content

Released September 16, 2016. Model 1660, 1778 Available as GSM or CDMA / 32, 128 or 256 GB / Rose gold, gold, silver, black, and jet black.

2266 Questions View all

rear case replacement for iPhone 7

I want to replace rear case to iPhone 7 , A1778 and I ask iFixit has original part which has Apple logo.

I have to replace lcd+touch so I should replace rear case too.

This replacement of rear case is too hard? Suggestions?

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

Apple doesn’t sell replacements to third parties, therefore unless you buy a second hand original case, what you may find in the market will be a non original chinese replica despite the Apple logo. The housing replacement is not particularly difficult but presents some critical steps as many flat cables are firmly glued to the case and the risk of tearing up something in the process is there. Particular care is needed with the dock, as it’s a bigger flat cable and has quite a bit of conductive glue that has to be preserved and transferred to the new housing, otherwise some problems might arise with cellular communications. Be careful not to mix screws too..other than that the iFixit guides will lead you in the process step by step.

iPhone 7 Rear Case Replacement

Was this answer helpful?

Score 2
Add a comment

Add your answer

Riccardo will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 4

All Time: 80