Cellular version of Apple's 2nd generation iPad Air. Model A1567.

34 Questions View all

Screen popped out on my iPad Airs 2 LTE

I have an iPad Air 2 in a logitec (not one of their best) cases. Otherwise think they make decent products. In pushing the iPad into the Keyboard, it was pushed a little to hard and loosened the screen from the iPad just on top side.

The screen still works fine. I don’t think this is a situation of battery swelling. What would I need to just get the screen off and reset the screen to the iPad base? Thanks

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

1 Answer

If your up to it you can re-apply the screen using this IFIXIT guide iPad Air 2 LTE Display Assembly Replacement. Basically you’ll need to completely remove the display, clean off the old adhesive and then apply a fresh set of tapes iPad Air 2 Cellular Adhesive Strips. You’ll need the tools listed here: iPad Air 2 LCD Screen and Digitizer

iPad Air 2 LCD Screen and Digitizer Image

Product

iPad Air 2 LCD Screen and Digitizer

$179.99

iPad Air 2 Cellular Adhesive Strips Image

Product

iPad Air 2 Cellular Adhesive Strips

$6.99

Was this answer helpful?

Score 0
Add a comment

Add your answer

Gino Vogt will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 9

All Time: 9