Skip to main content

Fix Your Stuff

Right to Repair


27" display with 2560 x 1440 pixels resolution Thunderbolt & MagSafe cable attachments

141 Questions View all

Replaced logic board and still having the same no backlight issue.

Replaced the logic board in the display with no difference. Pretty sure I can rule out logic board failure. No backlight but the display still has a picture with flashlight head closely. And the camera, usb, and ethernet still work the same. The charging for the older macs still works as well. Would it be the power supply not applying power to the backlight or the LCD? I have had stints of perfect operation in short bursts regardless of which logic board, but only after lots of messing about with plugging power in and removing it. I really don’t have another resource for information like this.

Answer this question I have this problem too

Is this a good question?

Score 0


Is it the controller board on the LCD itself?


Add a comment

1 Answer

Most Helpful Answer

The LCDs are quite common to fail on these unfortunately, so it’s likely the LCD controller board.

In cases where we have the same symptoms, we’ve found it to either be main logic board or LCD panel.

Was this answer helpful?

Score 1
Add a comment

Add your answer

huntertrainboy will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 41